503-447-377
$4 each
Bing model 54
ROTAX GASKET REPLACEMENTS made in USA.
These are HIGH Quality parts selling for far less than OEM parts. Save money on your next de-carbon.
JBM Industries sells quality gaskets individually only. We do NOT sell complete gasket sets.  You don't
need to buy a lot of gaskets that you don't need.  
These parts are not made by ROTAX and are not imported.
Last updated 01/21/16
To Order:
E-mail JBM Industries to request a Pay Pal Invoice.
                 Items will be sent by US MAIL.
  • You may also mail cash, check, or MO to:  
( allow $8.00  domestic shipping per order )
JBM Industries
7308 Dania Dr
Independence, Ohio  44131   USA                      
 sales@jbmindustries.com
Click HERE to go to: How to Order Page
Click here to see other Rotax parts we manufacture.
Rotax 582
GSKT-582-WJ
ROTAX 582 Water Jacket Gaskets for cylinder head. Sold by the pair
only.  
TSR Material.
Slightly different than original in that these are molded to a cross-section
more like an O-ring. This is a molded part, not lathe-cut.
Compare to Rotax part # 850-040 "Rubber Ring"     Compare @ $23.99
each
GSKT-582-Head
Rotax 582 Cylinder Head O-Rings.  Sold by the pair only. This is the most
commonly changed part that seals cylinder head to cylinder liner. These
are made from Dupont "Viton" material for excellent compression set and
high heat use.
Compare to Rotax part # 850-540                           Compare @ $24.49
each
GSKT-582-EX
Rotax 582 Exhaust gasket. -- Sold each.
High Temp material with metal mesh to prevent
blow-out. Coated with Non-Stick Graphite for easy
removal.                         Compare @ $10.33 each
Compare to Rotax part # 850-633
GSKT-582-Base
Rotax 582 cylinder base gasket made with
non-stick material  .030" thick
Compare @ $21.51 each
Compare to Rotax part # 850-775
GSKT-582-WP
Rotax 582 Water-pump cover gasket. --Sold each
Non-stick material  .016" thick
Compare @ $8.70
Compare to Rotax part # 831-616
$12 pair
$12 pair
$2 each
$4 each
$7each
$7each
GSKT-C-Gearbox
Rotax "C" Geabox gasket made with
non-stick material. .016" thick
Compare @  $13.79
Compare to Rotax part # 950-211
GSKT-503-EX
Rotax 503 exhaust gasket. Sold each.
4 pcs required if you have air-shroud.
High Temp with metal mesh material
and non-stick graphite coating.
Compare @ $7.97
Compare to Rotax part # 831-842
GSKT-447-EX
Rotax 447 or 377 exhaust gasket.
Sold each.
4 pcs required if you have air-shroud.
High Temp metal mesh graphite.
Compare to Rotax part # 850-114
$4 each
GSKT-503-IN
Rotax 503, 447, or 377 intake gasket.
Single or dual carburetors.
Non-Stick material.  .032" thick
4 pcs required if you have air-shroud.
Replaces Rotax part # 831-866
$2 each
GSKT-503-Head
Rotax 503 Head Gasket set. ( Pairs only )
Soft aluminum material. -- .032" thick
Compare @ $22.16
Replaces Rotax part # 831-881
$12 pair
$7 pair
GSKT-503-Base
Rotax 503 cylinder base gasket ( Pair )
Non-Stick material  .030" thick
Compare @ $8.66
Replaces Rotax part # 831-855
$2 each
$4 each
GSKT-Bowl-PAP
Bing Float Bowl Gasket
Standard non-stick
gasket material as found
on many carburetors.
GSKT-Bowl-COMP
Bing Float Bowl Gasket
Material much like
original cork, but mixed
with rubber as a
composite for less
compression set.
Our softest gasket.
Bing "54" Carburetor Float Bowl Gaskets made by JBM
Click here to go to JBM Industries HOME page
WARRANTY
INFORMATION CLICK HERE
O-Ring Gasket for top of BING
model 54 carburetor.  Vacuum
can pull a lot of dirt and water
around your slide. O-Ring fits
in the counter-bore in the
carburetor body. Viton Rubber

Hex head stainless steel
screws will never rust and
replace the chewed-up slot
headed screws that might be
rusty.
$6 kit for one carburetor
GSKT-E-Gearbox

Rotax
"E"  type Gearbox Gasket
Compare at $15.84
Compare to Rotax part # 950-215
$8 each
GSKT-B-Gearbox

Rotax "B" type gearbox gasket
Compare to: Rotax part # 930-536
$9 each
GSKT-Singlecarb

Fits intake manifold: Single carb configuration
Rubber Ring from TSR material
83 x 1.5 x 3.5 mm
Compare to Rotax part# 850-150
Compare at $4.78
$2 each